DESCRIPTION
Flat product formed by two systems of elements (bars or wires) that intersect at right angles, whose points of contact are joined by Electrowelding, meeting the requirements of the standard.
They respond to a typology, according to catalogue, and set dimensions of 6.00 m x 2.20 m.
The absence of the 2nd and penultimate longitudinal bar eliminates the double layer of reinforcement in the overlap area.
CHARACTERISTICS
Advantages of commercial meshes
Economic
Project execution cost
Reduction of human resources and suppression of material means for preparation and assembly of reinforcements on site.
Reduction of deadlines for execution of the structure with new construction methods that prevent reinforced concrete on site. This achieves:
Decrease in delivery times. In conventional construction, execution of the structure represents 50% of the total time of the carrying out of a building
Reduction of downtime of use of equipment and works material (formwork, cranes and other), during the on site reinforcement of the elements.
Immediate delivery as there is stock on site.
Cost of non-quality
Non-quality is the decisive cause of the problems that occur during the life of the concrete structures. 10-15% are due to faults in the materials used. The use of standard, high-performance meshes.
In the case of buildings, risk reduction can provide significant savings in the Guarantee.
Improvements in Health, Safety and Environment
Work in industrial plant facilitates control of the risk.
Decreasing human resources favourably reduces the number of accidents on site.
Respect for the Environment. The waste generated in industrial facilities is correctly managed.
Quality assurance
Manufactured according to a Quality Management System.
Electrowelding: They are used in accordance with the standard.
Each package of mesh is accompanied by a traceability label.
Delivery of technical documentation relating to the material served accompanying each shipment.
Standard mesh Manufacturer Warranty Certificate: Document attached to the delivery note of each shipment.
Firmness and stiffness of the standard meshes. The welded joints ensure the positioning of the bars, and their immobility during the concreting, as well as the minimum coating.
The double layer of longitudinal reinforcements that forms in the area of overlap is eliminated by removing the 2nd and penultimate longitudinal bar of the standard meshes.
Used as reinforcement of the compression coat of the singly and doubly reinforced framework:
Collaborates as reinforcement against the horizontal loads.
Used as support and guide for the reinforcements of the negative loads of the framework.
Controls the cracking of the transition areas.